Star Micronics TSP654II-WebPRNT-2 Instrukcja Obsługi Pobierz pdf (Strona 11)

3-3. Connecting the AC Adapter

Note: Before connecting or disconnecting the AC adapter, make sure that the printer and all the devices connected

to it are turned o.

en remove the power cord from the outlet.

(1) Connect the AC adapter to the power cord.

(2) Connect the AC adapter to the connector on the printer.

(3) Insert the power cable plug into an AC outlet.

CAUTION

When disconnecting the cable, take hold of the cable

connector to pull it out. Releasing the lock makes it easy

to disconnect the connector.

Pulling the cable excessively could cause damage to the

connector.

Note: We recommend that you use the standard AC adapter and power cord.

If you are not using the optional AC adapter (PS60A-24B1 series) and are instead preparing your own power

supply, note the following points.

• Useapowersupplythatis24VDC±10%and2.1Aormore.

(Select a power supply with current capacity that is appropriate for the actual printing ratio.)

• UseapowersupplythatsupportswithSELVoutputorLPS(LimitedPowerSource).

• Takeintoconsiderationthenoiseintheenvironmentthattheprinterisinstalledin,andtakeappropri-

ate measures to protect the printer from static electricity, AC line noise, etc.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 32 33

Brak uwag

Star Micronics TSP654II-WebPRNT-2 Instrukcja Obsługi Strona 11